Please confirm your preference
Americas
Europe, Middle East, Africa
Asia Pacific
English
Português
English
English
中文

 

 

On February 1, 2022, Hexion Holdings Corporation announced that it has completed the sale of its Coatings and Composite businesses, which includes the epoxy specialty resins and base epoxy resins and intermediates product lines, to Westlake Chemical Corporation. For epoxy coatings and composite product inquiries, please contact customer service at https://www.hexion.com/en-US/company/contact/ or Service@hexion.com.

kRT™ Proppants

Description

kRT

Hexion’s kRT™ proppants are a curable resin coated sand available in 16/30, 20/40, 30/50, 40/70, and 100 mesh sizes. kRT proppants are an economical resin coated sand that control proppant flowback in reservoirs down to 110˚F and enhance conductivity.

Typical Applications

Fracture treatments:    

At closure stress up to:

  • 8,000 psi [55 MPa] (16/30 and 20/40) 
  • 10,000 psi [69 MPa] (30/50 and 40/70)
  • 12,000 psi [83 MPa] (100)

At bottom-hole static temperatures* from:

  • 140 - 450°F [60 - 232°C] (16/30 and 20/40)
  • 110 - 450°F [43 - 232°C] (30/50, 40/70 and 100)

*Does not require a low temperature consolidation aid down to recommended temperatures.

Technical Advantages and Benefits

  • Enhanced conductivity
  • Proppant flowback control
  • Proppant fines reduction
  • Cyclic stress resistance
  • Minimizes proppant embedment
  • Reduces respirable silica dust exposure below PEL limits

Typical Properties

Property Standard Value Unit Test Method
Specific Volume 0.381 [0.0457], 0.383 [0.0459], 0.382 [0.0458], 0.382 [0.0458], 0.383 [0.0459] cm³/g [gal/lb]
API Mesh Size 16,30, 20/40, 30/50, 40/70, 100
Bulk Density 1.50 [12.6], 1.56 [13.0], 1.44 [12.0], 1.40 [11.7], 1.42 [11.9] g/cm³ [lb/gal]
Color tannish to grayish
Compatibility Fully compatible with most commonly used fracturing fluids, both water and oil-based systems. Testing with fluids prior to pumping is advised.
Composition resin coated, northern white frac sand
Particle Size Distribution meets or exceeds API RP 19C
Physical State solid granule
Pipe Fill Factor 0.665 [0.0796], 0.641 [0.0768], 0.694 [0.0832], 0.714 [0.0855], 0.704 [0.0840] cm³/g [gal/lb]
Resin Type thermosetting, curable
Solubility in Water, Brine & HCl 0.0 weight %
Solubility in HCl/HF acid, API RP 19C < / = 3 weight %
Solubility In Oil 0.0 weight %
Specific gravity 2.62, 2.61, 2.62, 2.62, 2.61
Turbidity < 250 NTU (FTU)

 
 
Welcome to Hexion eSecurity
Your platform for receiving secure content.
If you've received a notification, you can validate its authenticity by going to our validation page.