Please confirm your preference
Americas
Europe, Middle East, Africa
Asia Pacific
English
Português
English
English
中文

 

 

On January 31, 2021, Hexion Holdings Corporation announced that it has completed the sale of its Coatings and Composite businesses, which includes the epoxy specialty resins and base epoxy resins and intermediates product lines, to Westlake Chemical Corporation. For epoxy coatings and composite product inquiries, please contact customer service at https://www.hexion.com/en-US/company/contact/ or Service@hexion.com.

SiberProp™ Proppants

Description

SiberProp Product Photo

SiberProp™ proppants are a Stress Bond™ technology resin coated sand available in a 16/30 mesh size. Tan in color, the SiberProp resin system is applied to high quality frac sand. The unique properties of the SiberProp resin have redefined curable proppants. By using a specially formulated resin system, SiberProp proppants develop significant strength in the bonded pack at very low bottom-hole temperatures without the need for external consolidation aids.

Typical Applications

Fracture treatments:

  • At closure stess up to 8,000 psi [55 MPa]
  • At bottom-hole static temperatures from 130 - 200°F [54 - 93°C]
  • When high strength in the bonded pack is necessary or desirable at very low temperatures

 

Technical Advantages and Benefits

  • Low temperature bonding down to 130°F [54°C] bottom-hole static temperature without the use of a low temperature consolidation aid
  • Optimized AcTivator™ consolidation aid loading recommendations are available based on well specifics to maximize performance and minimize additional cost to the operator
  • Higher strength in bonded pack at lower temperatures than conventional curable resin coated proppants
  • Consolidates with closure stress in the fracture
  • Helps prevent proppant flowback

Typical Properties

Property Standard Value Unit Test Method
Absolute Volume 0.392 [0.0470] cm³/g [gal/lb]
API Mesh Size 16/30
Bulk Density 1.54 [12.9] g/cm³ [lb/gal]
Color tan
Compatibility Fully compatible with most commonly used fracturing fluids, both water and oil-based systems. Testing with fluids prior to pumping is advised.
Composition resin coated frac sand
Median Particle Diameter 0.9097 mm
Particle Size Distribution meets or exceeds API RP 19C
Physical State solid granule
Pipe Fill Factor 0.649 [0.0775] cm³/g [gal/lb]
Resin Type thermosetting, curable
Solubility in Water, Brine & HCl nil weight %
Solubility in HCl/HF acid, API RP 19C < / = 3 weight %
Solubility In Oil nil weight %
Specific gravity 2.55
Turbidity < 250 NTU (FTU)

 
 
Welcome to Hexion eSecurity
Your platform for receiving secure content.
If you've received a notification, you can validate its authenticity by going to our validation page.